| |
| |
| Axle Weigher |
 |
| Introducing Massloads third generation low profile
weigh pad. |
 |
With 20 independent micro
load cells in each pad this is our most
sophisticated electronic pad ever. Excellent
for static and dynamic weighing |
|
Large weighting surface, extremely low
profile (only 0.7” high!) |
|
Available in capacities up to 20 tons
per pad |
|
Machined from light weight, high strength
aluminum, easy for transportation. |
|
Built in scale protection system to avoid
damage from sudden breaking or acceleration
during measurement |
|
Your choice of signal outputs (m V/V;
mA; V) |
|
Optional leveling track for dynamic weighting
|
|
IP67 sealing |
|
|
| Dimensions |
 |
 If
its an accurate, portable and low profile
weigh pad that you are looking for, look
no further. This is the lowest profile weigh
pad we have ever offered. The accuracy is
excellent due to the 20 independent load
cells under the top plate. Accommodating
for any vehicles with pneumatic tires. Measurement
can be done on single or dual tires for
wheels or axle load weighing ( 2pad system.
). Be assured of accuracy. Use out data
case for the ultimate in portability |
| |
|
| Ultraslim Weighpad Specifications |
|
| Rated Capacity
|
20,000 lbs or 40,000 lbs |
|
| Graduation Size |
50
lb graduation standard (other resolutions
available) |
|
| Static Accuracy |
20k
Model
±50lb up to 5000lb,
±100lb from 5001 to 20,000lb
40k Model ±50lb up to 5000lb ±100lb from
5001 to 20,000lb ±250lb from 20,001 to 40,000
lb |
|
| Weight |
42
lbs/pad ( 2pads per system ) |
|
| Material |
High
strength aluminum alloy |
|
| Stability |
0.5%
full scale / year |
|
Ground Level
Requirement |
Level,
flat, and hard surface
required. (concrete or ashphault)
Level within 1/8” over entire
supporting surface |
|
Compensated
Temp Range |
-10ºC
to +55ºC for scales |
|
| Dimensions |
Max
: 30 ½" x 28/8" x 0.7 "; "weighing surface
28 3/8" x 16 ½ " |
|
| Environmental |
Water
and dust protection up to 95% humidity resistance |
|
|
|
|
| |
| |
|
