| TS-1000 |
| |
The TS-1000
is a new metallic weighbridge, an innovative design, which
offers everything the users expect: Perfect weighing performance,
strength, easy installation and maintenance, therefore a profitable
investment. All weighbridge components are fully
compliant to the European regulations and for legal metrology
and to strict quality standards, offering a scale that will
weigh accurately and trouble free over a lifetime under the
harshest conditions. |
With our
model TS-1000 we offer you the opportunity to select a weighbridge
at a very competitive price with all the benefits this implies.
You no longer require special transport to move this weighbridge.
A standard forklift truck will do for loading/ offloading
and for the installation work. Due to its design characteristics
it is possible to adapt this weighbridge to almost every special
requirement without involving high extra cost. |
Within one
day the TS-1000 can be dismantled and relocated on a new site. |
In short,
the TS-1000 offers you the best price/performance ratio available
nowadays. |
GENERAL
DESCRIPTION |
 |
Complete steel and modular construction |
|
Concrete ramps cast on site |
|
1000 mm inner space between the driveways (optional
middle cover) |
|
400mm Height |
|
High precision load cells integrated in weighing modules |
|
Overcomes DIN 8119 calculations. |
|
Approved to OIML and EU regulations |
|
Very easy to install |
|
It consists of drive sections which connected along
with screws in order to form the total platform. |
|
There are connected across with connective beams for
the easier transportation and assembly of the Weighbridge |
|
Along the foundation there are small columns of concrete
on the sides of the platform for the stability of the
Weighbridge when the trucks are passing. |
|
These columns of concrete are in a visible height for
the truck driver (80 points height above the platform)
which helps to the right direction of the truck on the
Weighbridge. |
|
| STANDARD VERSIONS: |
| Dimensions |
Number
of load cells,
model RC3, 30tn |
Capacity |
6 x 3m |
4 |
40tn |
8 x 3 |
6 |
60tn |
12 x 3 |
6 |
70tn |
14 x 3m |
8 |
70tn |
18 x 3m |
10 |
100tn |
18 x 3m |
10 |
120tn |
|
WEIGHBRIDGE
COMPONENTS |
| Weighbridge terminal
LD5218 |
| This state-of-the-art
terminal comes with software dedicated to handle weighbridge
operations and: |
|
a stainless steel
IP65 housing |
|
a large 16-character LCD,
backlight display - display resolution up to 990,000div. |
|
an integrated alphanumeric
keyboard with tactile feedback for data entry,
operation and programming of weighing data |
|
with RS232 serial port for
connection with PC or printer; with standard additional
RS485 serial port for connection to remote display |
|
with tilt input and two digital
outputs (set points) |
|
complete with real time clock
and totalizing memory |
|
mains power supply (85-265VAC) |
|
 |
|
| Load cell
ASC |
| The ASC has proven
to be the most reliable solution in hundreds of weighbridges
installed over the world with a minimum failure rate. |
|
| Each weigh module
arrives with the load cells already integrated, each with a
18m shielded signal cable for connection to the central junction
box. while protective conduits for the load cell cables are
part of the standard supply. |
| Fanfold printer
type EPSON LX-300 |
| EPSON LX300 prints
the weigh tickets. |
| LEWIS, Truck
Scale Operations Management |
| Lewis is a comprehensive
and user friendly software package, developed by Leon Engineering
for weighing and vehicle flow control in weighbridge applications |
