| Weigh
in Motion |
| If
you need to move your weigh in motion system around, this
is the type of system for you. Massload provides an excellent
portable solution for weigh in motion. |
Weighpads |
The
weight sensors we suggest for a portable system are our very
successful line of Ultra Slim Weighpads. Lightweight, robust,
and low profile, these pads can be laid on any flat, hard,
and level surface, connected to the computer, and within minutes,
your system is ready to go. |
| Ultra Slim
Weigh Pad |
 |
 |
Ask about our new
1 meter wide ultraslims
Our customers have asked for wider pads to make weighing easier |
| Wireless Weighing
In Motion |
 |
| Leveling
Track |
For
best accuracy, it is recommended that the vehicle is level
with the weighpad. For this, we offer interlocking leveling
track. The length of track is dependent on the length of vehicle
you are weighing. The vehicle should be completely on the
leveling track before any axle crosses the weighpads, and
should remain on the leveling track until all axles have passed
over the weighpads. |
This
track comes in compact and lightweight 36" x 24"
(20lbs / piece) pieces. Handles are machined into the pad
that make it easy to carry and assemble. |
 |
| Roll Up Levelling Mats |
| Our roll up levelling mats makes moving and setting
up as easy as 1-2-3. |
| Designed to work with Ultraslim Weigh pads |
| Great for portable weighing in motion and static applications |
|
| Cables |
Cabling
for a portable system consists of 1 Y-cable. There is an industry
standard, water tight amphenol connector on each of the Y
- ends that connect to the weighpads. On the other end is
a 9 pin D connector that connects to the weigh in motion interface
card. The length of cable can be up to 300 feet. |
| Weigh in Motion Scale
Interface |
| Direct interface
from Weighing in Motion scale to usb port of computer |
| Facts you should
know |
 |
Samples sensor at 16,000 times a second
- competition samples at 550 per second |
|
If used in static weighing application (.002% resolution
) |
|
Unlimited linearity adjustment |
|
No external power supply needed |
|
| Fully rated USB 1.1
computer interface - use weigh in motion software with your
laptop! Forget the full sized desktop. |
| 16 bit resolution |
| Connect up to 8 devices
to one computer |
| Can power twelve
300 ohm load cells |
| Backwards compatible
with LCIC card |
| Small, standalone
package, easy to wire to any scale |
| Calibration is stored
on the device, not the computer, just plug it in and go. |
| Easy to use, windows
based calibration utility and library. |
| Drivers for Win98,
2000, XP, Linux and OS X |
| Software |
| Optional Components |
|
12VDC to 110VAC inverter to use power from
a cigarette car lighter. |
|
Custom made carrying cases to keep all your weigh in
motion components together and safe. |
|
Printers |
|
Wireless networking components. |
|
Pricing and Quotations |
|
